Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Riggs Park, DC

Haas Door Garage Door Roller Replacement in Riggs Park, DC

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers. Typical cost $150-$350.

Need Haas Door garage door roller replacement in Riggs Park, DC? We diagnose the problem, give you a price before any work starts, and finish most jobs in a single visit. Worn steel or plastic rollers swapped for quiet, sealed nylon rollers. We work on Haas Door garage doors of every age, from older models to current lines, and carry or can source compatible parts. Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

When to call for Haas Door garage door roller replacement

  • Grinding, squealing or rumbling as the door moves
  • The door shakes or jerks in the track
  • Cracked, chipped or wobbly rollers
  • Rollers that no longer spin freely

Why this happens

  • Worn-out bearings in steel rollers
  • Cracked builder-grade plastic rollers
  • Rust or dust packed into the bearings

Safe checks before you call

  • Watch the rollers while the door moves. They should roll, not slide.
  • Look for cracked plastic wheels or wobbling stems.
  • Leave the bottom rollers to a technician. They sit in brackets that hold cable tension.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Inspect every roller, hinge and track section
  2. Replace rollers one hinge at a time, with sealed nylon rollers for a quieter door
  3. Replace the bottom rollers safely with tension controlled
  4. Lubricate hinges and bearings
  5. Test for smooth, quiet travel

How much does Haas Door garage door roller replacement cost?

$150-$350Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Haas Door services

Local Haas Door garage door roller replacement for Riggs Park, DC

With large seasonal temperature swings in District of Columbia, track brackets and hinge screws work loose over time, and a loose track is the most common reason a door rubs, binds or comes off its rollers.

Our Haas Door garage door roller replacement service covers Riggs Park (ZIP codes 20011, 20017 and 20064) and nearby towns including Chillum, MD (0.7 mi), Kennedy Street (1.3 mi), Brookland (1.6 mi) and Petworth (1.8 mi). Call (833) 435-8883 to book a visit in Riggs Park.

Haas Door Garage Door Roller Replacement: frequently asked questions

How much does Haas Door garage door roller replacement cost in Riggs Park, DC?

Haas Door Garage Door Roller Replacement typically costs $150-$350 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Haas Door garage door roller replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Haas Door garage door roller replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Haas Door warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where District of Columbia or Riggs Park requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Riggs Park, DC

Holmes Garage Door Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

Northwest Door Garage Door Track Repair

Bent, loose or misaligned tracks straightened, realigned or replaced.

Typical $150-$400

Holmes Garage Door Extension Spring Replacement

Side-mounted extension springs replaced in matched pairs, with safety cables installed.

Typical $150-$350

Marantec Opener Circuit Board Replacement

Marantec is a German manufacturer of residential and commercial door openers.

Typical $175-$400

Opener Gear & Sprocket Replacement

Stripped drive gears replaced so the motor moves the door again.

Typical $125-$275

Hörmann Garage Door Sensor Repair

Photo-eye sensors realigned, rewired or replaced so the door closes reliably.

Typical $100-$250

Raynor Commercial Garage Door Repair

Repairs for commercial sectional, overhead and service doors.

Typical $250-$1,000

Clopay Garage Door Repair

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $150-$450

Overhead Door Smart Garage Door Opener Setup

Overhead Door-brand openers come from the same company as Genie, the Overhead Door Corporation.

Typical $100-$900

Allstar Opener Gear & Sprocket Replacement

Allstar openers are no longer made. Replacement remotes and many parts are still available, and we'll tell you when replacing the opener makes more sense.

Typical $125-$275

Hörmann Torsion Spring Replacement

Hörmann is a German manufacturer of residential and commercial doors and openers with North American operations.

Typical $200-$450

Linear Garage Door Opener Installation

Linear openers and remotes are now part of Nice North America. Linear's MegaCode remotes are common on older openers and gate systems.

Typical $350-$800

Garage door stuck, noisy or broken?

Talk to a garage door technician in Riggs Park, DC now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote